VJ-1617H OPERATION MANUAL Before using
3-11
(2) When using 4-color set
1. Make sure that the printer's operating condition is as follows:
• Printing or other operation is not in progress.
• Operation panel display is in the Normal condition.
2. Press the [POWER] key on Operation panel.
• "CR Mainte.: Start" is displayed on Operation panel.
• If you press the [Cancel] key on Operation panel at this point, you can skip the next procedure and
turn OFF the printer. If you have already performed daily maintenance, you can skip the operation.
• Make sure you perform daily maintenance. If the printer goes into Sleep mode or the
power is turned OFF without daily maintenance, nozzles may get clogged.
No. Name
1Power switch
To Next Page
Loading...
Need help?
General