27
Bearings
√ Ensure all bearings are lubricated, run freely, and display no
excess movement, grinding, or rattling. Check headset, wheel
bearings, pedal bearings, and bottom bracket bearings.
Cranks and pedals
√ Ensure pedals are securely tightened to the cranks.
√ Ensure the cranks are securely tightened and are not bent.
Check that the derailleur is adjusted and functioning properly.
√ Ensure shifter and brake levers are attached to the handlebar
securely.
√ Ensure all shifter and brake cables are properly lubricated.
Derailleur and mechanical cables
√ Check that the derailleur is adjusted and functioning properly.
√ Ensure shifter and brake levers are attached to the handlebar
securely.
√ Ensure all shifter and brake cables are properly lubricated.
Frame, fork and seat
√ Check that the frame and fork are not bent or broken. If either
frame or fork are bent or broken, they should be replaced.
√ Check that the seat is adjusted properly, and seat post quick
release lever is securely tightened.
Motor drive
√ Ensure hub motor is spinning smoothly and motor bearings are
in good working order.
√ Ensure all power cables running to hub motor are secured and
undamaged.
√ Make sure the hub motor axle bolts are secured and the
torque arm and torque washers are in place. Ensure battery is
charged before use.
√ Ensure there is no damage to battery.
√ Lock battery to frame and ensure that it is secured.
Mycle Maintenance
To Next Page
Loading...
