EasyManua.ls Logo

myFirst Camera 3 - How to Use; Getting Started: Card and Power; Camera Modes and Capture; Media Playback and Management

myFirst Camera 3
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Press and hold the Power button to
turn the camera on or o. After
booting, tap it as the Return button.
Please insert the memory card into the
slot in the correct direction as shown
on the left.
Press the Lens-Switcher button to
switch the front and rear camera.
Press and hold the Up button to enter
Macro mode. Press and hold again to
exist.
Tap the Shutter button to take a photo.
Press and hold the Shutter button for 2
seconds to start recording.
EN | How to Use
Press the Left or Right button to
browse files. Press the Shutter to play
the video.
To browse your photos and videos,
press the Down button to enter the
playback mode.
In playback mode, press the Up for the
deletion menu. Press the Shutter to
confirm your selection, and Power
button to cancel.
When browsing photos, tap the
Shutter button to zoom in and the
Power button to zoom out.
During the zooming, press and hold
the Left, Right, Up or Down button to
adjust the position.
1