MYSON POWER EXTRA
SPRING RETURN ZONE VALVE
MPE 228 / MPE2 1” - 2 PORT 28mm VALVE
Thank you for choosing a MYSON heating control.
The MPE 228 is designed to control water circulation in primary hot water or
central heating circuits. The motor is powered to open the valve with a spring
return to the closed position.
The valve is not directionally sensitive and may be fitted with flow through either
Port A or Port B.
For convenience the neon indicator light illuminates, indicating when the valve is
open.
When the manual lever is moved to the right, the valve is open. This is used when
filling, venting or draining the system. The spring return valve rests in the closed
position.
TECHNICAL SPECIFICATION
Motor Supply Voltage 230 V AC
Frequency 50 Hz
Power Consumption 6 W
Motor Insulation Rating Class ‘F’
Maximum Working Pressure 10 Bar
Maximum Water Temperature 95
o
C
Maximum Ambient Temperature 52
o
C
KV value 7.3
Switch Rating 3(0.5) A
High Temperature Silicon Cable 1100mm
Valve Body Brass with spring loaded
Mica filled PTFE shoes
Actuator Power to Open
Spring to Close
MPEDOC003 Issue: 8
To Next Page
Need help?
General
