Quick operating guide
*
–
Blood glucose measurement with
TIP: Before measuring, wash your hands
thoroughly, keep them warm
or gently massage the (lancet)
insertion point before measuring to
stimulate the circulation.
PREPARING THE LANCING DEVICE
Pull off the cap from the
lancing device.
OVERVIEW OF MYSTAR EXTRA
®
Mini USB connection
- Easy transfer of your data onto a PC or laptop
with Sanofi-authorised software.
DISPLAY
- Displays readings, symbols, calculations
and error messages
CONFIRM button
- Switching on and off
- Menu navigation
MEALS button
- Allocation of mealtime tags
UP arrow key
- Searching through next options
6 DOWN arrow key
- Searching through previous options
Test strip slot
- MyStar Extra
®
works with the tried and tested
BGStar
®
test strips
OVERVIEW OF THE BGSTAR
®
TEST STRIPS
CONTACTS
- Insert the test strips with the contacts
pointing upwards
SAMPLE AREA
- Please dab blood on here!
MONITORING WINDOW
- Please do NOT put any blood on here!
1
2
3
4
5
6
7
8
9
10
1.
Fit a new lancet into the lancet
holder.
- Twist off the lancet cap.
2.
Replace the cap on the
lancing device.
3.
Adjust the penetration depth.
4.
Pull the tensioning device
until you hear a click.
5.
* These instructions are only a guideline. Please
read through the operating instructions carefully
before using MyStar Extra
®
for the first time.
4
2
3
5
6
7
8
10
9
1
To Next Page
Need help?
General
