N-Com B901L Quick Start Guide

N-COM B901 & DUCATI MULTIMEDIA
2
USING THE SYSTEM AS A PAIR
To connect to the audio system of the Ducati and keep the intercom connection via Bluetooth with your passenger
active, proceed as follows.
1. Pair up the N-Com system fitted on the Rider helmet to the motorbike, as described in the paragraph above (items
1-5).
2. Pair up the N-Com system fitted on the passenger’s helmet to the motorbike. From the Ducati “SETTING” menu,
select the item “MENU” (this is done by pressing the ENTER key on the Ducati handlebar).
3. Select the item “BLUETOOTH” and afterwards the item “PAIRING”.
4. Select the item “PASSENGER” to start searching for the device installed on the passenger’s helmet.
5. Bring the N-Com system to the “Configuration” menu and select the item “Mobile pairing” (please refer to the N-
Com user manual).
6. The N-Com device is detected after a few seconds. Select it from the list. After a few seconds, the Ducati system will
go back to the PAIRING screen and the N-Com device will be stored in memory. On the main screen, the two devices
will appear as being connected one to the other (connection is confirmed by a blue icon at the top right of the main
screen).
7. From now on, all audio coming from the motorbike is transmitted to the helmet.
The pairing up is saved by both the helmet and the motorbike, and it is not lost upon turning them off. That is, after
turning on the Ducati and the N-Com systems, their connection is automatic.
INTERCOM FUNCTION
To use the Rider-Passenger intercom connection while connected to the audio system of the Ducati, proceed as follows.
1. Pair up and connect the N-Com systems fitted on the Rider’s and on the Passenger’s helmet (please refer to the N-
Com user manual).
2. To activate the Rider-Passenger conversation, briefly press the “n” key (please refer to the N-Com user manual). The
audio coming from the motorbike is interrupted and the intercom switches on. Vice versa, by interrupting the
intercom, both the rider and the passenger are able to hear once again the audio coming from the motorbike.
N.B.: In case the motorbike audio does not switch back on automatically upon disconnection of the intercom, press the
“PLAY” command from the motorbike menu.
N.B.: In case it is enabled, deactivate the Smart Navi System function on both N-Com devices.
N.B.: During intercom connection between the two helmets, it is not possible to hear the audio coming from the
motorbike.
N.B.: If the mobile phone is connected to the N-Com system as main mobile phone, it will be possible to make and
receive calls both during intercom communication and while listening to the audio coming from the motorbike.
USING THE VOX SYSTEM (RECOMMENDED)
1. It is recommended to enable the “VOX INTERCOM” function on both N-Com systems in order to allow the automatic
switch between audio coming from the motorbike and the intercom audio.
The “VOX” function can be enabled/disables and the activation sensibility setting can be carried out through the N-
Com EASYSET program or the N-Com EASYSET APP (please refer to the N-Com user manual).
2. The intercom between the two helmets can be automatically activated by saying one word out lout into one of the
two microphones. The intercom is automatically deactivated when both users do not speak for 20 seconds. At this
point, you will be able to continue listening to the audio coming from the motorbike.
MOBILE PHONE CONNECTION
In order to use the mobile phone while riding, it is recommended to pair it up directly to the audio system of your
motorbike (refer to the motorbike instructions manual). By doing so, the calls will be transferred to the helmet. You can
answer incoming calls by using the controls on the Ducati.

N-Com B901L Specifications

General

Brand	N-Com
Model	B901L
Category	Motorcycle Accessories
Language	English