To Next PageTo Next Page
Need help?Do you have a question about the N.P.I. Nordic Hot Tubs CROWN XL and is the answer not in the manual?
General| Electrical Requirements | 240V / 50A |
|---|---|
| Voltage | 240V |
| Frequency | 60 Hz |
| Pumps | 2 |
| Heater | 4 kW |
| Shell Material | Acrylic |
| Frame Material | Wood |
Hazards of drowning, water temperature, health issues, and child safety.
Dangers of prolonged immersion and high temperatures, including unawareness and fetal risk.
Electrical safety precautions, grounding, GFCI use, and prohibiting unauthorized components.
Factors like permission, support, drainage, access, path, view, and weather.
Diagrams showing recommended wiring entry points for various models.
Specific wiring entry points for Bella, D'Amour, Retreat, and Escape models.
Wiring entry points for Stella, Encore, Jubilee, and Rendezvous models.
General electrical safety, dedicated circuits, wire types, GFCI, and wire gauge.
Steps to convert Classic and Modern Series hot tubs to 240V.
Diagrams for house breaker box and GFCI breaker box connections.
Instructions for connecting a 120V power cord, including safety.
Diagram identifying key components of the hot tub.
Steps for filling the tub, preparing the filter, and checking T-valves.
Instructions on how to remove floating weir or visible basket filters.
Checking unions, activating jets, purging air, and setting pump speeds.
Adding chemicals before heating and setting the desired temperature.
Priming, temp control, jets, light, filter cycles, and auto polling.
Priming, temp control, jets 1/2, light, modes, filter cycles, auto polling.
Explanation of modes and programming automatic filter cycles.
Explains common diagnostic messages and their meanings.
Recommended actions for specific diagnostic messages.
How to operate and adjust whirlpool diverter jets.
How 2-way and 4-way diverters control water flow to different jets.
How to use air controls and adjust Nordic Star jets.
Overview of the topside control pad and LED lighting system.
Explanation of the 2-way diverter jets on the Rendezvous LS model.
Details on diverter positions for the Crown XL DTS model.
Addresses issues like no water movement, GFCI tripping, and partial jet operation.
Emphasizes contacting dealers for service and not attempting self-repair.
Importance of water quality and the role of ozonators.
Recommended sanitizers, warnings against improper use and specific chemicals.
Step-by-step guide for adding chemicals to the hot tub water.
Explains TA and pH, their importance, and how to adjust them.
Explains CH, ideal chlorine levels, and shocking the water.
Explains factory default and programmable filter cycles.
Lists recommended practices and items to avoid for water care.
Causes and solutions for cloudy water and excessive foam.
Causes and solutions for irritation, odor, and waterline deposits.
Step-by-step instructions for draining, cleaning shell, siding, and cover.
Care instructions for different cabinet materials and the hot tub cover.
Step-by-step guide and materials needed for winterizing the hot tub.
Instructions for safely restarting the hot tub after winter storage.
Options for registering the hot tub warranty online or by mail.
Fields for owner and dealer information for warranty registration.
Information on the proper disposal of electronic components according to WEEE Directive.
Table detailing model measurements, capacity, and dry weight.
Table showing voltage, amperage, and recommended breaker sizes for different series.
