N-Tron 7026 Series - Show or Clear the Last System Error; Show System Information

For Sales and Support, Contact Walker EMD • www.walkeremd.com • Toll-free: (800) 876-4444 • Tel: (203) 426-7700 • Fax: (203) 426-7800
(Revised 2011-11-15) Page 148 of 169
CLI Commands, Continued…
Show or Clear the Last System Error
Command Name
Syserr
Description
Show or clear the last system error
If clear is not supplied, then the last system error is displayed.
Syntax
syserr [clear]
Parameters
Clear
Clear the last system error.
Example
N-TRON/Admin> syserr
Last System Error: None.
N-TRON/Admin> syserr clear
Last System Error: Cleared.
Notes
Show System Information
Command Name
Sysinfo
Description
Show system information
Syntax
Sysinfo
Parameters
None
Example
N-TRON/Admin> sysinfo
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+
+ Model: 7026TX
+ Boot Loader: BL 2.0.5.1 (0x02000501)
+ OS Version: 3.4.3
+ Build Date: Aug 2 2010 at 16:13:22
+ Copyright: Copyright (c) 2008-2010 N-TRON Corporation All rights
reserved.
+
+ Processor: 66 MHz (66000000)
+ SDRAM Size: 16 MB
+ Flash Size: 8 MB
+ File System: 6422528 Bytes, 2621440 Free, 3801088 Used, 0 Bad
+ MAC Address: 00:07:af:fe:27:40
+ IP Address: 192.168.1.201
+ Subnet Mask: 255.255.255.0
+ Gateway: 192.168.1.1
+ Cfg Device: Not connected
+
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Notes