81-SS30048a
- 7 -
4 Daily Inspections and Care
4-1 Daily Inspections
・ In the event an abnormality is found during the inspections below, be sure to stop using the product
and contact the distributor.
Performing inspections periodically ensures increased safety during product use.
Basic inspection details
・ Are there any cracks or deformations in the tires or wheels (inner or outer)?
・ Have the grooves on the tire outer periphery worn away, indicating that the time for tire replacement has been
exceeded?
・ Does the brake ever not work well or not work at all?
・ During use, does not the CONPAL unit produce an abnormal noise?
・ During use, do not the wheels shake significantly?
・ Are any wheel installation nuts or main body installation bolts loose?
・ Does the center cap come off easily?
・ Do not loosen, disassemble, or modify parts connected by bolts and nuts. When disassembly or repair is
required, always request the distributor to perform the task.
・ When taking care of the product, do not pour water on the product. Wipe down the product using a cloth
that was soaked in water and then squeezed tight.
・ Do not apply grease or oil to the product. Doing so may lead to an inadequate brake force, resulting in
falling.
・ Do not use soapy water or oil based cleaners. Doing so may lead to liquid entering the interior and, as a
result, failure to exhibit an adequate brake force, resulting in falling.
To Next Page
Loading...