GM Series
TM19040 P.18/31
CAUTION
• Never approach the rotating part during machine operation. Person(s) may be caught by the
rotating part, causing fatal accidents.
• GM may become hot during operation. After stopping the operation, do not touch GM until it
has cooled down.
• Immediately stop operation when any abnormality occurs. Continuous operation may cause
injuries to the operator.
• Observe GM specifications and the limitation of specifications specified by us.
(Specifications and the limitation should be in compliance with the confirmation notice for
GM or the specifications and operating agreement for the machine for which GM is used.)
To Next Page
Loading...