GM Series
TM19040 P.25/31
NOTE
If the lubricant is filled up excessively, the inner pressure increases, which can cause a leakage of
the lubricant or damage to the oil seal.
When the lubricant is small in amount, insufficient lubrication may cause damage to GM.
Step 5 When filling is complete, insert the plug into the oil fill port and oil level check port, and tighten
with the specified tightening torque. (Refer to the confirmation notice for the plug size.)
NOTICE
When tightening the plug with O-ring to each port, make sure that the O-ring is not damaged.
Step 6 If the lubricant has adhered to the periphery, wipe it off sufficiently.
Table 5-3 Plug size and tightening torque
Size G(PF)3/8 G(PF)1/2 G(PF)3/4 Rc(PT)1/2 Rc(PT)3/4
Tightening torque[N-m] 58.8±9.81 98.1±19.6 147±14.7 58.8±19.6 98.1±19.6
To Next Page
Loading...