Nachi EZ-CFDL Series - Page 64

5.2Ethernet setting
5.2.2
FTP
setting
FTP Settings
1
Select <Constant setting> –
[
8 Communication] – [2. Ethernet] – [3 FTP].
>> Following setting screen will appear.
2
Set the required parameter referring to "
Table 5.2.3 FTP setting
".
3
When the setting is completed, press f12
<Complete>.
4
T
o enable the
new settings, restore the
power of the
robot controller.
Table 5.2.3 FTP setting
Parameter Description
FTP
service
Sets
whether
to
enable
[FTP
service
function]
of
this
controller
.
When
it
is
enabled
and controller power is turned on, FTP service will be started. When it is disabled,
FTP service from the FTP client for this controller will be
stopped.
Anonymous
Account
Sets the
authorization of
anonymous
connection.
When [Only
Allowed] is
set, the
user will not be
able to log on with
his/her user nam
e and the passw
ord.
The
account that has the administrative access right
will be prevented from accessing it,
but only the account specified as
an anonymous access can access it.
Connectable
number
Sets the m
aximum connec
table number to
one server at
the same tim
e.
The
number can be from 16 to 1000.
Timeout
period
Sets
the
time
to
disconnect
the
inactive
user
from
the
server
on
the
second
time
scale.
The tim
eout period
can be
set
in the
0 to
900 s
econds.
This v
alue enables
FTP protocol to close all the
connection even when it fails.
FTP home
directory
Sets the directory path to be
used for FTP service. The directory path can only
be set
to directories under “D:¥”. The directory path cannot be set
to any other directories.
Directory
Permission
When “Write only” or “Read/Write” are selected, to write a file from a client to an FTP
server is
permitted.
This setting
is only
for the
directory to
receive files
from users
.
FTP login
message
Is displayed
on the clie
nt connected
to the FTP
server for
the first tim
e.