Need help?Do you have a question about the Nadoli BS-RT513660 and is the answer not in the manual?
Read manual carefully, wear safety glasses, complete framing/plumbing before installation.
Clean with mild detergent and water; avoid abrasive cleaners or solvents.
Protect the shower base finish during installation using protective packaging.
Apply silicone sealant around the shower base extrusion for proper sealing.
Ensure continuous silicone application without interruptions for water tightness.
Align with reference marks and view side installation details for silicone application.
Drill 1/8" pilot holes for securing the shower base.
Fasten the shower base using specified screws (Ref. B).
Illustrates built-in and corner installation methods for the shower base.
Ensure bathroom walls are level for adequate installation and check framing.
Position and install the shower base within the prepared alcove or frame.
Apply mortar for a stable and level base installation.
Carefully position the shower base into the framed opening.
Drill 1/8" pilot holes and secure the base using screws (B01).
Secure the base firmly using screws (Ref. A).
Apply sealant and ensure proper support for the shower base.
Apply final sealant for waterproofing and allow 24 hours for curing.
Detail on ceramic tile placement under wall channels for models with wall channels.
Details who the 10-year warranty applies to and what it covers for bases and doors.
Outlines conditions and damages not covered by the limited warranty.
General| Product Type | Bathroom Sink |
|---|---|
| Material | Ceramic |
| Color | White |
| Shape | Rectangular |
| Warranty | 1 year |
To Next Page