10
AnOlller solulion is to have a differential input on
the
amplifier. ThIs is the case with the DSM
mon
ito
r and, in ge
ne
rel with pr
ot
essio
nal
equipmenrs. Two wires are sutticioot to make ttle
conna<:tion, the eartM
baing Sbepped through ttle
main...
On
the
o!hor hand, in the case
01
ball9ry
opetahon a third earth wire is required.
II the NAGRA E is connected to an unbalanced
ilIf1
pt!;er, the problem
Ca
n
be
minimized by !he
use
01
short earth connections to the amplilier
and
me
ATN; by keepi
nglhe
mains wires of
the
amphfier and
01
the
ATN as parallel
as
possible 10
evoid formation 01 a big lO
op
.
Do not torget that
It>e
microphone input
ot
the
NAGRA E is balanced
and
used as Iina input lor
low94s
between 2.5 and 1200 mV. Thus the
operation is
a1
w
aVS
car,ied our using 3 wi'es, one
connecting
the
earth of
the
equiprn9nr and the
OllI
e<
1\1/
0 transmining Ihe signal. It the source is
unbaIanc.:l,
0fI8
at the inpur wi'as should
be
connected to its earth and thu other
008
to its
actiw
termioal. It
thelwO
oqoipments are already
connected
10 a
cornnlOfl
8arth, the first earth wire
ohoukt be cut.