To Next PageTo Next Page
Need help?Do you have a question about the NAIM DAC-V1 and is the answer not in the manual?
Audio Outputs| audio outputs | 4-pin DIN, 2 x RCA |
|---|---|
| headphone output | 6.3mm TRS jack |
Output Specifications| output levels | Variable or 2.1V RMS fixed |
|---|---|
| frequency response | 10Hz to 20kHz +0.1dB/-0.5dB |
| total harmonic distortion | <0.002% |
Digital Inputs| usb input | 1 x asynchronous USB (type B socket) |
|---|---|
| s/pdif inputs | 5 x S/PDIF (1 x BNC, 2 x RCA Phono, 2 x TosLink optical) |
| input format support usb | 44.1kHz to 384kHz (16 to 24 bit) |
| input format support s/pdif | 32kHz to 192kHz (up to 24 bit) |
Power| mains power | 100V, 115V or 230V, 50/60Hz |
|---|---|
| power consumption | <22VA |
Weight and Dimensions| dimensions | 87 x 207 x 314mm |
|---|---|
| weight | 4.3kg |
Introduces the DAC-V1 as a six-input digital-to-analogue converter and preamplifier for S/PDIF and USB audio sources.
Explains the function and selection of the Signal Ground Switch to prevent audio hum.
Details connecting the DAC-V1 analogue outputs to amplifiers, recommending DIN over RCA.
Guides on connecting the DAC-V1 to a computer via USB for audio playback.
Describes how to select DAC-V1 inputs using front panel buttons or the remote handset.
Details selecting the DAC-V1 as the sound output device on a computer for USB audio playback.
Explains how to control the DAC-V1 volume using front panel or remote handset controls.
Guides on entering and navigating the DAC-V1 setup menus using the remote handset.
Details the four top-level setup menu items: Settings, BitPerfect, USB Status, and Firmware.
Enables the use of 'bit perfect' test files for ensuring optimum playback quality.
Displays DAC-V1 USB connection data, firmware details, and options for reset/update.
