GT30 Configuration Settings
GT10/GT30
129
6.3 Entering Configuration Settings from the GT30 Main Unit
COM. Port communication parameter settings (PLC communication parameter
settings)
Bitrate: PLC communication speed
This sets the communication speed or Baud rata, for communication with an external
device (PLC) connected to the GT30.
Each time the [Function] key is pressed, the Baud rate switches in the sequence of
9600/19200/38400/57600/115200 bits/s. Set the speed to match that of the PLC
connected to the GT30.
Format: Transmission format
This sets the communication parameters (data length, stop bits, parity) for the external
device (PLC) connected to the GT30.
Theitemsdisplayed are: Data length/ Stopbit / Parity, andeach time the [Function] key
is pressed, the display switches in the sequence of: [7/1/None], [7/1/Odd], [7/1/Even]
[8/1/None], [8/1/Odd], [8/1/Even].
Set the parameter to match those of the PLC connected to the GT30.
Learning the shortcut keys saves time!
[RETURN]To complete the settings and return to the previous screen,
touch the [ESC] key.
Explanation of this function
•
TOOL Port communication parameter settings
The default (initial) values for the TOOL Port communication
parameter settings are: 19200 bits/s, 8/1/Odd.
•
COM. port communication parameter settings
The default (initial) values for the COM. port communication
parameter settings are: 19200 bits/s, 8/1/Odd.
To Next Page
Loading...