NAiS GT30 - Page 179

Servicing and Maintenance
GT10/GT30
151
8.4 Replacing the Waterproof Packing
8.4 Replacing the Waterproof Packing
8.4.1 About the Waterproof Packing
IfthepanelisbeingdetachedfromtheGTmainunitandthenreattached, thewaterproof
packingshouldbereplaced,inordertoassurethatthepanelremainswaterproof(IP65).
Product name Contents Product number
Waterproof packing Waterproof packings for replacement (set of 10)
For GT10 AIGT181
p
pg
p
pg
p
(
)
For GT30 AIGT381
8.4.2 Replacing the Waterproof Packing
Follow the steps below to replace the packing:
1. Remove the currently attached waterproof packing.
Remove the attached waterproof packing from the GT main unit.
2. Attach the provided waterproof packing.
Take out one of the replacement waterproof packing pieces and attach the outer edge
as shown in the illustration (do not use the inner edge).
When doing this, fasten it to the front frame, being sure not to twist the waterproof
packing.