100
3-section cutting blade:
Cutting blade cutting diameter Ø: 255mm
Noise and vibration data:
Noise measurement value determined in
accordance with ISO 22868, EN ISO 10517. The
A-rated noise level is typically as follows:
Brush cutter:
L
pA, av
:94.4dB(A) K=2.5dB(A)
L
wA
:103.4 dB(A) K=2.5dB(A)
Grass trimmer:
L
pA,av
:96.2dB(A) K=2.5dB(A)
L
wA
:104.4dB(A) K=2.5dB(A)
Pruner:
L
pA
: 93.9dB(A) K=2.5dB(A)
L
wA
: 108.2dB(A) K=2.5dB(A)
Hedge trimmer
L
pA
: 96.3dB(A) K=3dB(A)
L
wA
: 107.1dB(A) K=2.5dB(A)
Wear ear protection to prevent
hearing damage!
Vibration values (vector total of three directions)
determined in accordance with EN ISO 11806-1,
EN ISO 10517, EN ISO 11680-1 :
Brush cutter:
Front handle: 3.818m/s
2
Rear handle:6.525m/s
2
Grass trimmer:
Front handle: 2.829m/s
2
Rear handle: 7.219m/s2 K=1.5m/s
2
Pruner:
Front handle: 6.888m/s
2
Rear handle: 4.521m/s2 K=1.5m/s
2
Hedge trimmer
Front handle: 7.132m/s
2
Rear handle: 5.502m/s
2
K=1.5m/s
2
NOTE: The vibration level specified in these
instructions has been measured in accordance
with the standardised measuring procedure
specified in EN 11806-1 and can be used to make
equipment comparisons. The specified vibration
emission value can also be used to make an initial
exposure estimate.
WARNING! The vibration level varies in
accordance with use and may be higher than
the value specified in these instructions in some
cases. There is a risk of underestimation of the
vibration load if the appliance is used regularly
in this manner. For an accurate estimate of the
vibration load during a specific working period,
the periods during which the appliance is
switched o or is running but not actually being
used must also be taken into consideration. This
can significantly reduce the vibration load over
the total working period.
WARNING!
You can reduce the vibration risk, for example,
the risk of Raynaud's phenomenon, by taking
regular breaks during which you rub your hands
together.
Explanation of the symbols on the motor unit:
Warning! Read the operating instructions
before use!
Wear protective gloves!
Wear safety shoes!
Wear ear protection!
Wear a hard hat!
Wear safety goggles
To Next Page
Loading...