P12 :
Controller overheating selected value.
Value selected for the motor overheating temperature limit (110 ° C maximum).
Once the selected value is reached in the front motor or the rear motor, the overheating protection pictogram is displayed on the
instrument panel. At the same time, the maximum current will be limited to 85% and the turbo mode will be disabled.
P13 :
Selected value of the remaining battery power to automatically switch to E mode which varies from 1 to 100.
The rate of energy remaining in the battery to automatically switch to E mode is indicated in%.
E Mode and Riding Mode cannot be changed until the battery is charged.
P14 :
password to activate the scooter setting
To Next Page
Loading...
