Nantian Electronics PR9 ES - Page 3

2.3.2 PRINT TEST CONTENTS .................................................. 16
2.4 CONNECTION TO THE SYSTEM ....................................... 18
2.4.1 RS 232C SERIAL INTERFACE (STANDARD) ....................... 18
2.4.2 OPTIONAL SERIAL INTERFACE + USB INTERFACE CARD ... 18
2.4.3 OPTIONAL PARALLEL INTERFACE CARD .......................... 19
2.5 INFORMATION FOR THE OPERATOR .............................. 21
2.6 OPERATING PROCEDURES.............................................. 22
2.6.1 INSERTING A DOCUMENT WITH AUTOMATIC ALIGNMENT
22
2.6.2 INSERTING A PASSBOOK ................................................ 22
2.6.3 EXPULSION OF PROCESSED DOCUMENTS ...................... 23
2.6.4 REPLACING THE RIBBON CARTRIDGE ............................. 23
2.6.5 PAPER JAMS .................................................................. 25
3. OFF-LINE OPERATION, SETUP AND ADJUSTMENT ................. 28
3.1 Overview of off-line operation ....................................... 28
3.2 Classification of off-line operations ................................ 28
3.3 OPERATING PROCESS..................................................... 30
3.3.1 MENU SETUP ................................................................. 30
3.3.2 MENU PRINT ................................................................. 34
3.3.3 PRINTING TEST .............................................................. 37
3.3.4 ADJUSTMENT: ONLY FOR PROFESSIONAL ENGINEER ...... 43
3.3.5 DEBUG/TEST: ................................................................. 50
3.3.6 INQUIRY INFORMATION ................................................ 53
3.3.7 SCANNER’S CIS CALIBRATION ......................................... 53
3.4 PR9 MENU PARAMETERS ............................................... 54
4. FAILURE DIAGNOSE AND PREVENTIVE MAINTENANCE......... 80
4.1 MAINTENANCE .............................................................. 80
4.1.1 FAULT DETECTION ANALYSIS ......................................... 80
4.1.2 ANALYSIS OF THE OPERATING CONDITIONS WORKING
ENVIRONMENT: ........................................................................... 80
4.1.3 IDENTIFYING THE MALFUNCTION .................................. 80
4.1.4 FINDING THE CAUSE ...................................................... 80
4.1.5 SOLVING THE PROBLEM ................................................. 81
4.2 FAULT CLASSIFICATION .................................................. 81
4.3 POWER ON FAULTS........................................................ 81
4.4 DOCUMENT PRINTOUT FAULTS ..................................... 82
4.5 DOCUMENT HANDLING FAULTS ..................................... 83
4.6 PREVENTIVE MAINTENANCE .......................................... 84