Nardi Compessori Pacific 210 User Manual

1
Instruction Manual and Spare Parts Catalogue
Pacific 210
This manual contains operating instructions and maintenance schedules for the high
pressure breathing air compressors. Operators must read and understand all
information inside the manual.
ATTENTION. This machine can be used only after a careful reading of this instruction
manual. The machine may only used to produce compressed air. Other use is strictly
prohibited. The manufacturer and the supplier void all responsibility for damage or injury
resulting from failure to follow these instructions.
ENGLISH INSTRUCTION MANUAL

Nardi Compessori Pacific 210 Specifications

General

Model	Pacific 210
Category	Air Compressor
Max Pressure	10 bar
Power	1.5 kW
Voltage	230 V
Tank Capacity	24 L

Summary

General Information

Purpose and Short Description

Compressor Block

Technical Data

Safety Measures

Fundamental Safety Notices

Important instructions on personnel, technical, and operating safety emphasized by special marks.

Authorized Use

Defines the unit's intended purpose and limitations for safe operation and liability.

Safety Notices for Operation

Crucial operational safety guidelines including personnel, equipment, and procedures.

Warranty Information

Installation, Operation, and Filling Procedures

Installation of the Compressor Unit

Guidelines for proper installation of the compressor unit, considering environmental factors.

Outdoor Location

Specific instructions for installing the unit in an outdoor environment, considering air quality.

Indoor Location

Requirements for indoor installation, focusing on ventilation and air purity.

Starting Operation

Preparation for Operation

Pre-operation checks and preparations, including oil, filters, and motor direction.

Starting the Unit

Detailed steps for starting the compressor unit, covering different engine types and safety checks.

Filling Procedure

Connecting the Bottles

Procedure for safely connecting bottles for filling with compressed air.

Maintenance

Maintenance Record

Recommendation to record all maintenance work for tracking and avoiding future issues.

Maintenance Schedule

Scheduled maintenance tasks based on operating hours and time intervals.

Maintenance Work

Lubrication

Description of the two lubrication systems: splashed and forced lubrication.

Type of Oil

Guidelines on selecting the correct oil type for compressor operation and its properties.

Oil Change

Step-by-step procedure for changing the compressor oil and filter.

Changing the Oil Type

Procedures and precautions for changing the type of oil used in the compressor.

Filter Oil Change

Procedure for changing the oil filter when the compressor has an oil pump.

Intake Filter

Instructions for cleaning or replacing the micronic filter cartridge for intake air.

Intermediate Separator

Procedure for cleaning and replacing the sintered filter element in intermediate separators.

Coal Filter Cartridge

Details on the coal filter cartridge, its function, safety systems, and replacement intervals.

Filter Maintenance

Procedure for maintaining and replacing the filter cartridge, including O-ring checks.

Lifetime of Filter Cartridge

Graphs illustrating the lifetime of the filter cartridge under different temperature and dampness conditions.

Valves

Explanation of valve function and instructions for changing the valves as a set.

Valve Change (1st Stage)

Specific instructions for changing the valves of the 1st stage, including alignment marks.

Valve Change (2nd Stage)

Detailed procedure for changing the valves of the 2nd stage of the compressor.

Valve Change (3rd Stage)

Detailed procedure for changing the valves of the 3rd stage of the compressor.

Pacific 210 Spare Parts