Do you have a question about the Nashbar NA-KK2 and is the answer not in the manual?
Ensure the bicycle and trailer are in good working order and properly maintained for safe operation.
Do not overload the trailer. Keep loads centered, low, and secure to prevent injury during stops or tip-overs.
Understand how trailer weight affects starting, braking, and turning. Practice in a safe area.
Avoid potholes, curbs, sharp turns, and high speeds to prevent trailer tipping.
Only fit, experienced, and alert adults should operate the trailer.
Avoid distractions like headphones to maintain awareness of surroundings.
Use the trailer only with pedal-powered bicycles, not motorized vehicles.
Recommended to avoid riding in traffic; exercise extreme caution if necessary.
Essential for preventing head injuries. Cyclist and passengers must wear helmets.
Use factory wheels, maintain proper tire pressure (35 PSI), and use smooth tread tires.
Familiarize yourself with hitch operation and ensure a secure attachment each ride.
Always use the safety flag to increase visibility to motorists and cyclists.
Ensure child is securely fastened with harness, lap belt, and helmet at all times.
Only for children over 18 months, able to sit upright and hold head erect.
Clean fabric with mild soap and warm water. Do not use bleach or solvents. Replace damaged fabric.
Perform pre-ride checks: wheels, tire pressure, hitch, load, brakes, helmets, flag, buckles.
Inspect tongue, hitch, frame, tires, wheels, and fabric for wear, damage, or loose parts.
Steps to assemble the trailer frame, window panels, and secure them with pins.
Instructions for unfolding and securing the hitch tongue with the hitch pin.
Procedure for installing wheels onto axles, ensuring secure attachment and proper tire pressure.
Steps to attach the canopy, including securing panels and adjusting for ventilation.
Guide to assembling the safety flag poles and inserting them into the trailer body.
Detailed instructions for attaching the trailer hitch to bicycles with quick release or through axles.