Natec GENESIS P44 - Turbo and Auto-fire Functions; Activating Turbo and Auto-fire; Auto-fire Speed Selection; Vibration Feedback

Natec Genesis P44 2
Using the Turbo and Auto-fire functions
Note: any button means only Δ, O, X, , L1, R1, L2, R2, L3, R3, start buttons.
Activating/Deactivating the Turbo/Auto-fire function:
- Press turbo + any once to activate Turbo;
- press turbo + any twice to activate Auto-fire;
- press turbo + any three times to deactivate both functions.
Choosing the speed while in Auto-fire mode:
Default speed of the Auto-fire is
1
/
12
s. Press the turbo + select buttons to change it accordingly to the cycle:
1
/
12
→
1
/
24
→
1
/
33
→
1
/
5
→
1
/
12
... [s]
Note: green LED indicator will blink with the currently set speed.
Vibration feedback
The gamepad has two internal motors, which will not work when driver is not installed or game does not support the
function. See the manual of your game to check whether it supports vibration. If problems persist, check whether vibration
support was activated in the game options.
F. GENERAL
- Non-authorized repairs or taking the device to pieces make the warranty void and may cause the product
damage.
- Do not use the product in low and high temperatures and in the dusty atmosphere.
- The safe product, conforming to the EU requirements.
- The product is made in accordance with RoHS European standard. The standard was issued in order to
decrease the amount of the electronic and electrical waste emitted into the atmosphere.
- The WEEE symbol (the crossed-out wheeled bin) using indicates that this product in not home waste. You
protect the environment when you recycle hazardous waste appropriately. In order to get detailed information
about recycling this product please contact your retailer or a local authority.
For more information visit: www.natec-zone.com