Need help?Do you have a question about the National Geographic WIFI Weather Center 7in1 and is the answer not in the manual?
General| Display Size | 7 inches |
|---|---|
| Sensors | Temperature, Humidity, Wind Speed, Wind Direction, Rainfall, UV Index, Solar Radiation |
| Connectivity | Wi-Fi |
| Humidity Range | 10% to 99% |
| Rainfall Range | 0 to 9999 mm |
| UV Index Range | 0 to 15 |
| Update Interval | Every 16 seconds |
| Power Source | AC adapter, Batteries |
| Indoor Temperature Range | 0°C to 50°C |
| Outdoor Temperature Range | -40°C to 60°C |
| Wind Speed Range | 0 to 180 km/h |
| Compatibility | Weather Underground |
Description of the removable stand for the base station.
Function of the CHANNEL button for selecting the sensor channel.
Function of the MAX/MIN button to cycle through stored values.
Function of the WIND button to view different wind speed metrics.
Function of the RAIN button to display precipitation data.
Function of the CLOCK SET button for manual time adjustment.
Description of the wall mounting holder for the base station.
Function of INDEX and DOWN buttons for data display and value adjustment.
Function of the ALARM/SNOOZE button for alarm and snooze.
Function of the HISTORY button to view past 24-hour weather data.
Function of the SUN button for light intensity and UV index.
Function of the BARO button to display air pressure readings.
Description of the base station's colour display.
Function of the ALARM button for setting alarms.
Function of the ALERT button for setting temperature alerts.
Function of the UP button for value adjustment and display contrast.
Description of the antenna on the multisensor unit.
Description of the UV sensor on the multisensor unit.
Description of the mounting shoe for the multisensor.
Description of the wind cups measuring wind speed.
Description of the wind vane measuring wind direction.
Description of the RESET knob on the multisensor.
Description of the mounting clamp for the multisensor.
Description of the tipping bucket for rain measurement.
Description of the rain gauge component of the multisensor.
Description of the mounting bar for the multisensor.
Description of the circular level for sensor alignment.
Description of the thermo/hygrometer sensor.
Description of the LED function indicator on the multisensor.
Description of the battery compartment cover.
Description of the rain sensor component of the multisensor.
Description of the drain holes on the multisensor.
Display of current wind speed and direction.
Indication of active outdoor temperature alarms.
Display of the weather trend arrow indicator.
Display of indoor and outdoor temperature and humidity.
Indication of the outdoor sensor's signal reception strength.
Display of the battery level for sensors and base station.
Display cycling through perceived temperature indices.
Display of UV index and solar light intensity.
Display of the current date.
Display of the 12-24 hour weather forecast.
Display of the current time.
Indicators for internet time synchronization and Wi-Fi status.
Indicator for an enabled alarm.
Indicator for ice alert conditions.
Indicator for active Daylight Saving Time.
Display of the current moon phase.
Display of the current weekday.
Display of accumulated precipitation amount.
Display of air pressure in various units.
Option to switch between relative and absolute air pressure display.
Indicator for indoor climate comfort level.
Display of temperature and humidity for indoor and outdoor.
Display of the currently selected wireless sensor channel.
Setting for automatic switching between sensor channels.
Options for displaying rainfall data by time period (hourly, daily, etc.).
Setting for rainfall measurement units (mm or inches).
Display and setting for light intensity measurements.
Display of the current UV index and associated hazard level.
Display of recommended sunburn time based on UV level.
How to change the unit for displaying barometric pressure.
Switching the air pressure display between absolute and relative values.
Instructions for replacing the wind cups on the multisensor.
Procedure for cleaning and calibrating the UV sensor.
Instructions for replacing the wind vane on the multisensor.
Procedure for cleaning the rain collector.
To Next Page
