National Instruments NI-488.2 NI-488.2 User Manual

Chapter 7 Interactive Control Utility
NI-488.2 User Manual 7-8 ni.com
ibnotify mask Start an asynchronous wait for selected events where mask is a hex or
decimal integer or a list of mask bit mnemonics (for example,
ibnotify
TIMO CMPL
).
ibonl v Place device online or offline.
ibpad v Change primary address.
ibppc v Parallel poll configure.
ibrd count Read data where count is the bytes to read.
ibrda count Read data asynchronously where count is the bytes to read.
ibrdf flname Read data to file where flname is pathname of file to read.
ibrpp Conduct a parallel poll.
ibrsc v Request/release system control.
ibrsv v Request service.
ibsad v Change secondary address.
ibsic Send interface clear.
ibsre v Set/clear remote enable line.
ibstop Abort asynchronous operation.
ibtmo v Change/disable time limit.
ibwait mask Wait for selected event where mask is a hex or decimal integer or a list
of mask bit mnemonics, such as
ibwait TIMO CMPL.
ibwrt wrtbuf Write data.
ibwrta wrtbuf Write data asynchronously.
ibwrtf flname Write data from a file where flname is pathname of file to write.
Table 7-2. Syntax for Board-Level Traditional NI-488.2 Calls in Interactive Control (Continued)
Syntax Description

National Instruments NI-488.2 NI-488.2 Specifications

General

Brand	National Instruments
Model	NI-488.2 NI-488.2
Category	Software
Language	English