Index
M Series User Manual I-16 ni.com
quadrature encoder, B-43
selected gate to count enable delays, B-37
selected gate to selected source
delays, B-36
source period input requirements, B-38
two pulse encoder, B-43
timing output signals, exporting using PFI
terminals, 8-3
training, xxi
training and certification (NI resources), E-1
transducers, 2-3
trigger, 11-1
analog actions, 11-3
arm start, 7-31
pause, 7-32
PXI, 9-8
PXI_STAR, 9-9
Star Trigger, 9-9
start, 7-32
triggering, 11-1
analog accuracy, 11-7
analog actions, 11-3
analog edge, 11-4
analog edge with hysteresis, 11-4
analog input, 4-12
analog input channels, 11-3
analog types, 11-3
analog window, 11-6
APFI terminals, 11-2
counter, 7-31
digital waveform, 6-3
with a digital source, 11-1
with an analog source, 11-2
troubleshooting
analog input, C-1
analog output, C-3
counters, C-3
installation, C-3
NI resources, E-1
two-signal edge-separation
measurement, 7-17
buffered, 7-18
single, 7-18
types of analog triggers, 11-3
U
upgrading from E Series to M Series, D-1
USB
bulk transfers, 10-4
Signal Stream, 10-1
USB cable strain relief, 1-3
USB Signal Stream, 10-1
as a transfer method, 10-4
changing data transfer methods, 10-5
USB-6221 BNC
cable management, 1-4
connecting signals, A-19
fuse replacement, A-23
LED patterns, A-23
pinout, A-17
specifications, A-23
USB cable strain relief, 1-4
USB-6221 Screw Terminal
fuse replacement, A-16
LED patterns, A-16
pinout, A-15
signal label, 1-2
specifications, A-16
USB cable strain relief, 1-3
USB-6225 Mass Termination, A-30
accessory options, A-41
cabling options, A-41
fuse replacement, A-44
LED patterns, A-44
pinout, A-39
specifications, A-41
USB cable strain relief, 1-3
To Next Page
Loading...
Need help?
General
