Nature's Sleep GHOSTBED User Manual (English)

Other manuals for Nature's Sleep GHOSTBED

Questions and Answers:

O
Oscar ShieldsAug 2, 2025
What to do if no features of my Nature's Sleep GHOSTBED power foundation activate?
- T
  Travis EdwardsAug 2, 2025
  If no features of your Nature's Sleep Indoor Furnishing power foundation are working, the surge protection device or the electrical outlet might be faulty. Try these steps: First, program the remote control. Then, unplug the power cord, wait 30 seconds, and plug it back in to reset the electronic components. Test the outlet with another working appliance. Finally, ensure the wired remote control connector is securely attached to the control box.
R
Roger DavisAug 7, 2025
Why won't the head or foot section of my Nature's Sleep GHOSTBED return to the flat position?
- B
  Brandon DavisAug 7, 2025
  If the head or foot section of your Nature's Sleep Indoor Furnishing elevates but doesn't return to the flat position, there may be an obstruction in the bed mechanism. Elevate the bed and check for any obstructions and remove them. Also, the head section might be too close to the wall, or the headboard may be too close to the edge of the mattress. Ensure there's enough space between the headboard brackets and the mattress, and adjust as necessary.
J
James PalmerAug 12, 2025
What to do if my Nature's Sleep GHOSTBED remote illuminates but won't activate the bed?
- M
  Mariah MurrayAug 12, 2025
  If the remote control for your Nature's Sleep Indoor Furnishing lights up but doesn't activate the bed, make sure the power cord is properly plugged into a working, grounded electrical outlet. Test the outlet by plugging in another working appliance.
A
Angela SalinasAug 16, 2025
Why is there interference during operation of the head & foot lift on my Nature's Sleep GHOSTBED Indoor Furnishing?
- K
  Kyle ClarkAug 16, 2025
  If you experience minor interference with the head and foot lift function of your Nature's Sleep Indoor Furnishing, it could be due to radio frequency interference from other devices. Check the batteries in the wireless remote control and replace them with two new AAA batteries if needed. Ensure you're following the motor's duty cycle (no more than two minutes of operation over an 18-minute period). Press the lift buttons squarely and accurately. Wait a few seconds before pressing the button again.

Nature's Sleep GHOSTBED Specifications

General

Thickness	11 inches
Mattress Type	Memory Foam
Firmness	Medium-Firm
Sizes	Twin, Twin XL, Full, Queen, King, California King
Cover Material	Polyester and Viscose Blend
Cooling Technology	Gel Memory Foam, Breathable Cover
Warranty	20-year
Trial Period	101-night trial

Related product manuals

GHOSTBED POWER ADJUSTABLE BASE

16 pages

Nature's Sleep GHOSTBED Assembly Instructions

Other manuals for Nature's Sleep GHOSTBED

Questions and Answers:

Nature's Sleep GHOSTBED Specifications

Related product manuals