Safety Information 11
The Benchmark Scheme
Benchmark places responsibilities on both manufacturers
and installers. The purpose is to ensure that customers are
provided with the correct equipment for their needs, that it is
installed, commissioned and serviced in accordance with the
manufacturer’s instructions by competent persons and that it
meets the requirements of the appropriate Building Regulations.
The Benchmark Checklist can be used to demonstrate
compliance with Building Regulations and should be provided
to the customer for future reference.
Installers are required to carry out installation, commissioning
and servicing work in accordance with the Benchmark Code
of Practice which is available from the Heating and Hotwater
Industry Council who manage and promote the Scheme.
Visit www.centralheating.co.uk for more information.
UKCA/EC Conformity Declaration
Navien, hereby declares that the boiler models:
NCB700-2S+/42K, NCB700-3S/54K
to which this declaration refers, conform to and comply with
the essential requirements of the following applicable European
Standards and Directives.
Gas appliances: Regulation (EU) 2016/426
Standards EN15502-1, EN15502-2-1 and EN437
Boiler Efficiency: Directive 92/42/EEC
Regulation (EU) No.813/2013
Standards EN15502-1, EN15502-2-1
Low voltage: Directive 2014/35/EU and EN 60335-1,
60335-2-102
Electro-magnetic Compatibility: Directive 2014/30/EU
Standards EN 55014
Pressure Vessels: Directive 2014/68/EU
Navien, manufactures its products using a Quality Assurance
system in compliance with Standard EN-ISO 9001:2015.
To Next Page
Loading...
Need help?
General