EasyManuals Logo

Navien NPE-210A2 Installation Manual

Navien NPE-210A2
143 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #107 background imageLoading...
Page #107 background image
107Appendixes
a. High Altitude
Conversion Kit
b. Propane Gas & High
Altitude Conversion Kit
WARNING
Fire and Explosion Hazard
To prevent serious injury or death:
ONLY a qualified service agency* is required
to install a conversion kit in accordance with
Naviens instructions and all applicable codes
and requirements of the authority having
jurisdiction.
The qualified service agency is responsible
for the proper installation of this kit. The
installation is not proper and complete until
the operation of the converted appliance is
checked as specified in the manufacturers
instructions supplied with the kit.
BEFORE starting the gas conversion:
ALWAYS turn off electrical power supply to
the water heater and close the manual gas
shut-off valve.
ALLOW water heater to cool if it has been
operating.
* A qualified service agency is any individual, firm,
corporation or company which either in person or
through a representative is engaged in and is responsible
for the connection, utilization, repair or servicing of gas
utilization equipment or accessories; who is experienced
in such work, familiar with all precautions required,
and has complied with all of the requirements of the
authority having jurisdiction.
8.1 Gas & High Altitude
Conversion
This water heater is configured for Natural Gas at the
factory.
If conversion to Propane Gas is required by the
water heater, use the PROPANE GAS & HIGH
ALTITUDE CONVERSION KIT supplied with the
water heater.
If the water heater is installed at a high altitude
(above 5,400 ft) for NG, use the NATURAL GAS
HIGH ALTITUDE CONVERSION KIT supplied with
the water heater.
Note
For Propane high altitude conversion,
use the PROPANE GAS & HIGH ALTITUDE
CONVERSION KIT. Note that the Gas
Orifice from the PROPANE GAS & HIGH
ALTITUDE CONVERSION KIT covers the
water heater’s installation at an altitude of
0 to 10,100 ft.
DANGER
DO NOT perform a gas & High Altitude
conversion without an officially approved
conversion kit and the instructions supplied
by Navien. Gas & High Altitude conversion
using any other parts will result in extremely
dangerous burner operation, leading to fire,
explosion, severe personal injury or death.
Note
High Altitude Conversion kit (a)
and Propane Gas & High Altitude
Conversion kit (b) are attached to the
inside of Product’s case.
High Altitude
Conversion Kit (a)
and Propane Gas
& High Altitude
Conversion Kit (b)
8. Appendixes

Table of Contents

Other manuals for Navien NPE-210A2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Navien NPE-210A2 and is the answer not in the manual?

Navien NPE-210A2 Specifications

General IconGeneral
BrandNavien
ModelNPE-210A2
CategoryWater Heater
LanguageEnglish

Related product manuals