DIAMOND LOGIC® ENGINE BRAKE 405
Specifications
Table 54 Engine Brake Specifications
Brake actuator lash (cold) 0.48 mm (0.019 in)
Engine exhaust valve lash (cold) See (Adjusting Valve Lash,
page150)
Special Torque
Table 55 Engine Brake Special Torques
Brake Control Pressure (BCP) sensor 20-30 N·m (15-22 lbf·ft)
Brake piston adjustment locknut
27 N·m (20 lbf·ft)
Brake shutoff solenoid Tinnermann nut 7 - 11 N·m (5 - 8 lbf·lb)
Brake shutoff valve 24-30 N·m (18-22 lbf·ft)
High-pressure oil rail bolts (M8 x 90) 27 N·m (20 lbf·ft)
Plug assembly, M10
12 N·m (108 lbf·in)
Plug assembly, M12
12 N·m (108 lbf·in)
Injection Control Pressure (ICP) s
ensor
20-30 N·m (15-22 lbf·ft)
Oil pressure relief valve 41-48 N·m (30-35 lbf·ft)
Rail End Plug Assembly or attenuato
r
204 N·m (150 lbf·ft)
Special Tools
Table 56 Engine Brake Special Service Tools
Feeler gauge (long) Obtain locally
EGES-265-2
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
© 2009 Navistar, Inc.
To Next Page
Loading...
