The Main Menu is the starting point for all tools and utilities, which are depicted as icons.
Some icons lead directly to the function they represent, while others are menu icons that
lead to two or more functions. Menu icons are marked here with an asterisk (*) and are
mapped on the following pages.
The DMM Menu has icons for a temperature sensor and eight test meters, some of which
require different test leads.
The tester stores the last battery, system, and cable test results in its memory until you
perform another test. To review or print results before you retest, select a test type in the
Print/View Menu.
Info Menu
The Info Menu has three utilities to help you manage your test data, and track the tester’s
usage and history.
Battery Test
Tests one battery using
the battery information
you select in a series of
screens.
System Test
Tests the battery pack or
individual batteries, and
the starting and charging
systems.
Print/View
Allows you to view your
stored test results and
print them to a computer
through an infrared, or
IR, interface dongle.
Cable Drop Test
Tests both sides of a
circuit simultaneously
for voltage drop. Three
preset tests and one
user-defined.
DMM
Digital multimeter with eight
test meters, a temperature
sensor, and options for
clamps and probes.
Info
Includes a test counter,
data transfer utility, the
tester software version
and serial number.
Utility
Nine utilities, many of
which customize your
user interface.
MAIN MENU (Screen 1)
MAIN MENU (Screen 2)
MAIN MENU (Screen 3)
*
**
*
Totals
Displays the total number
of tests in three categories:
Lifetime of the tester, by
User ID, and by decision.
Transfer
A software and hardware
package allows you to
transfer test data to a
computer.
Version
Displays the software
version, total tests from
first use, and the serial
number.
View Test
Displays the last Battery and
System Test results. Sends
the result to a computer
through an infrared, or IR,
interface dongle.
View Cable Test
Displays the last Cable Drop
Test result. Sends the result to a
computer through an infrared, or
IR, interface dongle.
DC Volts
Measures voltage within a
range of 0 to 60 Vdc.
AC Volts
Measures voltage within a
range of 0 to 24 Vac.
Scope
Voltage trace with
time and frequency
measurements.
DC AMP
Tests the strength of
the direct current flow
through a circuit.
AC AMP
Tests the strength of the
alternating current flow
through a circuit.
Temp
Sensor that displays
temperature in degrees F
or C (units you can select
in the Utilities Menu.)
Ohm Meter
Tests a circuit for
continuity and resistance
measured in ohms (7).
METERS (Screen 1)
METERS (Screen 2)
METERS (Screen 3)
Diode
Tests a diode for forward
voltage drop.
Volts AMP
Measures two signals
simultaneously: DC
voltage and amperage.
REPORTS
REPORTS
Battery
test
Amp
clamp
Cable
drop
Required test leads
Battery
test
Amp
clamp
DMM clamps
or probes
Required test leads
Probes only
MAIN MENU PRINT/VIEW MENU DMM MENU
To Next Page
Loading...