*** Content ***
(1) Safety
(2) Location and Description of Safety Warning Signs
(3) Periodical Check
(4) Purpose of Machine and Installation
(5) Preliminary Check before Operation
(6) Pedal S/W Operation
(7) Adjusting UP / DOWN Speed of Upper Roller
(8) Nozzle Speed Control
(9) Upper Roller Stroke Control
(10) Upper Roller Pressure Control
(11) Nozzle Position Control
(12) Nozzle Angle Control
(13) Type of Nozzle
(14) Tape Setting
(15) Nozzle Heater Air Control
(16) Nozzle Heater Replacement
(17) Replacement of Upper Roller Heater and Upper/ Down Rubber Roller
(18) Problem Check
(19) Nozzle Replacement, Cleaning, Sensor Replacement
(20) LCD Data Input and Description
(21) Whole Figure and Names
(22) Electric Wiring Diagram and Parts
(23) Power Transmission Diagram
(24) Part List 1~2
(25) Part List - Knife
(26) Part List - Tape feeder 1~2
★ In order to order parts, please state Model No. and part No. in Part List pages
• lease carefully read this manual before using the machine.
• or more information, please contact us as shown the e-mail address below.
▶ E-MAIL : nawon@nawon.com, WEB SITE : www.nawon.com
▶ TEL : 82-31-942-1300 / FAX : 82-31-942-1305
ڌ
To Next Page
Loading...