Need help?Do you have a question about the Naxa NPB-257 and is the answer not in the manual?
Power| power requirement | AC 110/220V ~ 60/50Hz |
|---|---|
| power requirement (DC) | 12V 8 x 1.5V UM-1 / D size |
| power consumption | 18 Watts |
Operating Environment| operation temperature | +5°C - +35°C |
|---|
CD Section| channels | 2 channels |
|---|---|
| optical pick-up | 3 beams laser |
| frequency response | 100Hz - 16KHz |
Radio Section| receiving band | AM/FM |
|---|---|
| tuning range (AM) | 530 - 1710 KHz |
| tuning range (FM) | 88 - 108 MHz |
Weight and Dimensions| weight | 2.2 kg |
|---|---|
| width | 385 mm |
| depth | 240 mm |
| height | 155 mm |
Instructions to reduce the risk of electric shock by not removing the unit cover.
Warnings regarding battery usage, leakage, and mixing types.
Use the handle to safely and easily transport the unit.
Press the POWER button to turn the player on or off.
Set the FUNCTION switch to select CD/MP3/USB/AUX or RADIO mode.
Turn the VOLUME dial to increase or decrease the volume level.
Load compact discs into the CD compartment with the label side facing up.
Press the CD door latch to open or close the CD compartment.
Load USB memory sticks for music playback, not for charging devices.
Turn the Radio Tuning dial to tune to a radio station.
Set the BAND switch to select AM, FM, or FM ST.
Connect the unit to AC power, ensuring the voltage switch matches your region.
Install 8 UM-1 'D' size batteries for portable power, matching polarities.
Press the POWER button to turn the unit on or off. The power indicator will light up.
Set the FUNCTION switch to select the desired function mode (e.g., CD, RADIO).
Turn the VOLUME dial to increase or decrease the volume level.
Press the BASS key to enable or disable bass boost for enhanced low frequencies.
Player compatibility with various CD formats including CD-R, CD-RW, and MP3-CDs.
Instructions on how to open the CD compartment and load a disc properly.
Information on USB drive compatibility and limitations for music playback.
Instructions for plugging a USB memory stick into the USB port.
Avoid disassembling the casing and direct exposure to the laser beam.
Do not block ventilation, place flames, or expose to moisture.
Advice on placement, cleaning, attachments, and water/moisture avoidance.
Ensure proper ventilation and avoid blocking slots to prevent overheating.
Operate from specified power sources and follow grounding guidelines.
Protect power cords and understand polarized plug safety features.
Do not attempt self-servicing; refer all repairs to qualified personnel.
Conditions requiring unplugging the unit and referring to qualified service.
Use manufacturer-specified parts for replacements to avoid hazards.
Device complies with FCC rules, with guidelines to correct interference.
Unauthorized modifications may void FCC authority to operate the device.
To Next Page
