NBB HyPro-6 - Channel and Battery Management

98
NBB Controls +
Components
GmbH
Transmitter HyPro
®
-6 7,2V / HyPro
®
-8 7,2 V
> Channel number
During operation the set channel is shown in the right upper corner of the LC-display.
> Battery life warnings
Only one bar in the battery indicator symbolizes the end of battery capacity. From that moment the
transmitter can be operated for approximately another 30 minutes.
During this time, bring the unit into a safe position, switch off the transmitter and replace the battery
with a charged battery.
> Energy saving function
If no buttons are pressed within a specified time*, the transmitter switches off automatically. The display
turns off. A transmitter can also be manufactured without a standby function for continuous operation
as an option.
*The standby time can be set as desired.
Please refer to the technical documents for the exact position of the “On/Horn”
and “Frequency switching” buttons.