Journal Printer
How to Replenish the Dot-Matrix Journal Printer
5-16 NCR Personas M Series 5887 Operator Manual
17 Fold the end of the paper to form a clean, square edge and insert
it into the slot in the take-up spindle. Rotate the spindle so that
the paper wraps around it at least 3 times.
18 Push the take-up spindle down between the paper guides on the
printer until it clicks into position in the centre of the guides.
The spindle is spring loaded so you will need to tilt it as you
push.
x3
To Next Page
Loading...
