Letter Quality Document Statement Printer
How to Replenish the Statement Printer Paper
NCR Personas M Series 5887 Operator Manual 6-9
8 Slide the paper guides in the hopper to fit the stack.
Note: The rear guide is secured by a thumbscrew on the underside
of the hopper.
9 Slide the hopper forward to its operating position.
10 Slide the end of the paper between the guides on top of the
printer. Press the paper feed switch as shown below, to load the
paper into the printer. The paper should feed through the
printer.
11 If the printer cuts the statement, remove it from the capture bin.
12 Push the printer back into the ATM until it clicks into place.
Paper Guides
To Next Page
Loading...
