NCR 5887 - Page 156

Statement/Passbook Printer
How to Replace the Paper
7-4 NCR Personas M Series 5887 Operator Manual
9 Push down the paper feed switch on the top of the printer and
slide the paper forward slightly. The paper should be fed
through the printer and cut. If the paper is not fed through the
printer when the switch is pressed, push the paper further into
the slot and press the switch again.
10 Remove the statement from the end of the printer transport
.
11 Push the printer back into the ATM until it clicks into place.
12 Follow your in-house procedures for indicating that you have
replenished the paper.
13 If your ATM does not have the auto-supervisor option, press the
switch on the operator panel to the normal position.
14 Close and lock the exterior of the ATM.
1
2