Enhanced Page Turn Passbook Printer
How to Replace the Ribbon
9-2 NCR Personas M Series 5887 Operator Manual
How to Replace the Ribbon
9
When the printed characters become faint it may be because:
● The ribbon is jammed
● The ribbon is dry (see chapter on “Maintenance” for details on
storage conditions)
● The ribbon character life has been exceeded (an error message
will report when the ribbon character life has almost expired or
has already expired).
Note Please refer to NCR publication “Consumable Items for Self
Service, B006-4992” for ordering details and specification of the
printer cartridge.
To replace the printer ribbon, proceed as follows.
1 Open the exterior of the ATM.
2 If your terminal does not have auto-supervisor, press the switch
on the operator panel to the supervisor option.
3 Access the printer as described in Chapter 1, ’Getting Started’.
4 Move the print head carrier to the middle by holding the green
tab area and firmly pushing.
To Next Page
Loading...
