NCR 5887 - Page 186

Enhanced Page Turn Passbook Printer
How to Replace the Ribbon
9-4 NCR Personas M Series 5887 Operator Manual
8 Push down the print head carrier to its home position.
9 Tighten the ribbon by turning the ribbon feed knob on the
ribbon cartridge in the direction of the arrow marked on the
cartridge.
10 Firmly push the print head carrier left and right several times to
make sure the ribbon does not come out of the ribbon guide.
11 Push the printer back into the terminal until it clicks into place.
12 Follow your in-house procedures for indicating that you have
replaced the printer ribbon.
13 If you terminal does not have auto-supervisor, press the switch
on the operator panel to the normal position.
14 Close and lock the exterior of the ATM.
Ribbon Feed
Knob