Motorised Card Reader
How to Clear Motorised Card Reader Jams
NCR Personas M Series 5887 Operator Manual 10-3
6 If the card is jammed in the transport, turn the large pulley, or
use your fingers, to push the card through the transport and into
the card capture bin. When the card has been freed, proceed to
step 9.
7 If the ATM is configured with a smart card enabled MCRW, the
card may be jammed in the smart block at the rear of the card
reader. Check that the stopper pin has not jammed by moving
the pin backwards and forwards as shown below.
8 Use your fingers to turn the belt pulleys and move the card
through the transport into the capture bin.
To Next Page
Loading...
