3-2 Chapter 3: Technical Information
Video
Input Impedance 75 Ohm ± 2%
Polarity Positive
Input Signal Analog RGB 0.7Vp-p
Amplitude 0 - 0.7 ± 0.05 Vp
Multi-mode Supported Horizontal Frequency: 24 ~ 48 KHz
Vertical Frequency: 56 ~ 75 Hz
Control
Power On/Off switch with LED indicator
OSD
Brightness Digital
Contrast Digital
Horizontal Position Digital
Vertical Position Digital
Phase Digital
Clock Digital
Display Mode Setup Use EEPROM to save settings in
memory
OSD Format 20 characters x 9 rows
To Next Page
Loading...
