Hardware Installation 2-9
Cable Connection
A PS/2 or USB cable are required for use of the keyboard. The USB cable has a Standard
A plug on one end and the PS/2 cable has a PS/2 connector. Both cables have an RJ45 on
the opposite end. The PS/2 or USB Standard A plug is connected to the POS terminal
and the RJ45 connector is connected to the keyboard.
The keyboard also provides an additional RJ45 port to connect a peripheral device such
as a scanner or a cash drawer device attachment.
The following NCR cables can be used to establish connection between the
NCR 6932–6xxx 64–Key Keyboard and the POS terminal.
Part Number Description
1432-C792-0015 Cable, USB, 1.5 m, black
1432-C792-0040 Cable, USB, 4 m, black
1432-C793-0015 Cable, PS/2, 1.5 m, black
1432-C793-0040 Cable, PS/2, 4 m, black
Connect the cable to the appropriate RJ45 port and route the cable out of the keyboard
through the cable management features.
• Auxiliary—to connect serial devices
• Host—to connect to a POSterminal
To Next Page
Loading...