NCR 6932-2202-9090 - Assign Code(S) to a Key Using Key Code

Configuration 3-29
Assign Code(s) to a Key using Key Code
Using the Key Code, you can map up to 256 codes to a single key position.
Caution: When assigning code(s) using the Key Code, remember the following
restrictions:
• Pay special attention when using the Shift, Alt, and Ctrl keys as they provide two
states: down and up.
Example: If the left Shift key is pressed once in the Virtual Keyboard area, the user gets
a down code which keeps the key in a down state. If this programming is kept, it would
behave as if the left Shift key was pressed down continuously.
• For USB interface, the following codes cannot be assigned with other codes. On the
other hand, if other code is assigned, the codes cannot be appended.
• <Wake>
• <Sleep>
• <Power>
• <Vol Up>
• <Vol Down>
• <Media Select>
• <Mail>
• <Calculator>
• <My Computer>
• <WWW Search>