3-30 Configuration
To assign code(s) to a key using the Key Code, perform these steps:
1.
Select the key to program, and then select Key Code. The application displays the
following window.
The Key Code window enables the user to assign each key with a custom code(s).
• Mapping Sequence—displays the assigned code(s) in sequential order.
• Virtual Keyboard—displays a keyboard, which functions as an actual keyboard.
• Special Codes—displays the special codes that may not be included in the Virtual
Keyboard
2. To assign the code(s) for the selected key, do any of the following steps:
• Select the code from the Virtual Keyboard section, and then select OK.
• Select the code from the Special Codes section, and then select OK.
3. To update the keyboard with the assigned codes, do any of the following steps:
• From the main menu, select Keyboard→Update Key Mappings
• From the shortcuts toolbar, select the icon.
Saving the Keyboard Matrix
The keyboard assignments that are set using the Matrix Maker utility can be exported to
a DAT file. The DAT file serves as a backup and can also be used to update a keyboard to
the same configuration. To generate a DAT file for the current keyboard matrix set in
the Matrix Maker, follow these steps:
1.
From the main menu, go to File→Save As. The Save As window is displayed.
2. Browse to the folder in which to save the file.
3.
Input the file name, and then press Save.
To Next Page
Loading...