3-34 Configuration
Windows Command Line Firmware Update Utility
The Windows Command Line Firmware Update Utility is a command line tool that
updates the firmware of the keyboard using the command prompt.
To use the Windows Command Line Firmware Update utility, perform the following
steps:
1. Open a Command Prompt window as an Administrator.
Right-click on a Command Prompt shortcut→select Run As Administrator→select
Yes.
2. Navigate to the directory where the HY-FirmwareUpdate.exe file is located.
3. At the command prompt, enter the following command:
NCR-FirmwareUpdate.exe 2 <firmware file path>
To Next Page
Loading...