7167 Owner’s Manual Chapter 6: Commands
November 2003
174
Recognizing Data from the Printer
An application sending various Real Time and non-Real Time commands to which the
printer responds can determine which command a response belongs to by the table below.
Responses to Transmit Peripheral Device Status (1B 75) and Transmit Paper Sensor Status
(1B 76) are non-Real Time responses and will arrive in the order in which they were
solicited.
Batch Mode Response Response Recognized By:
ASCII HEX
ESC u 0 1B 75 0 0 0 0 0 0 0 x x Binary
ESC v 1B 76 0 0 0 0 0 x x x Binary
GS I n 1D 49 n 0 x x 0 x x x x Binary
GS r n 1D 72 n 0 x x 0 x x x x Binary
Real-Time Response
Response Recognized By:
ASCII HEX
GS EOT n 1D 04 n 0 x x 1 x x 1 0 Binary
DLE EOT
n
10 04 n 0 x x 1 x x 1 0 Binary
GS ENQ 1D 05 1 x x x x x x x Binary
XON 0 0 0 1 0 0 0 1 Binary
XOFF 0 0 0 1 0 0 1 1 Binary
Auto Status Back (ASB)
Response Recognized By:
ASB Byte 1 0 x x 1 x x 0 0 Binary
ASB Bytes 2-4 0 x x 0 x x x x Binary
To Next Page
Loading...
