3-97 Service Level Troubleshooting
• To select an option, press the Paper Feed button.
Set Power Off mode
This function allows users to set the time to Power off mode. This setting determines the
time when the printer powers off after it goes to standby mode. Once the device enters
the power off mode, all LED are turned off. If the feed key is pressed, the printer exits
power off mode and enters normal mode.
Caution: Be extremely careful in changing any of the printer settings. This is to avoid
inadvertently changing other settings that might affect the performance of the printer.
• To select an option, press the Paper Feed button.
To Next Page
Loading...