Appendix E: Thai Font Support
Outline
The NCR 7169 Multifunction Printer supports printing of Thai characters. Code Page
874 (Thai) supports Thai characters, but some of their characters define only a part of
one character. Actual Thai character is made up of a combination of some characters,
with a maximum of four characters in CodePage 874, for one Thai character. The NCR
7169 Multifunction Printer supports the function which combines Thai characters with
Code Page 874's characters.
Validate Thai code page function
The Thai code page function is validated when the following conditions are selected:
• Online mode
• Asian Mode=OFF
• Code Page=874
Thai Character Configuration
Thai character consists of a maximum of four levels:
• Top level—only top or above level characters are allowed to be placed on the Top
level, which is the highest layer.
• Above level—only topor above level characters are allowed to be placed on the
Above level, which exists between the Top level and the Base line.
• Base line—only base line characters are allowed to be placed on the Base line,
which exists between the Above level and the Below level.
• Below level—only below level characters are allowed to be placed on the Below
level, which is the lowest layer.
To Next Page
Loading...