NCR 7360-K071 - Removing Tri-Light;Lane Light Assembly

4
Standard Tri–Light/Lane Light Assembly with Lane Light
Label (Self Checkout)
Removing Tri–Light/Lane Light Assembly
To remove the Tri–Light/Lane Light assembly (with or without Camera), follow these
steps:
1. Turn off the NCRSelfServ Checkout software and hardware systems. For more
information, refer to "General Operational Procedures" section of NCR SelfServ™
Checkout (7360) Hardware Service Guide (B005–0000–2378).
2. Remove the screw securing the Tri–Light/Lane Light Assembly to the Tri–Light
/Lane Light pole.
Tri–Light/Lane Light Assembly