NCR 74 OFX (7874) - Scanning Procedure; Weighing Procedure

4-12 Chapter 4: Operation
Scanning Procedure
25507

ToscanitemswiththeNCRRealScan74,usethefollowingprocedure.
1.
Verifythescannerisready(ScanAdviser’s3centerLEDsaregreen).
2.
PasstheitemacrosstheRealScan74lowerwindow.Slidetheitemfromthe
checkstand,acrosstheTopPlate,andbackontothecheckstand.
3.
Ifagoodreadoccurs,theScanAdviserflashes5greenLEDsandatoneisemitted
(ifprogrammed).
IftheScanAdviserdoesnotflash,theRealScan74didnotreadthebarcodelabel.Try
toorientthelabelandscantheitemagain.Ifthisdoesnotwork
aftertwo(2)more
tries,manuallyenterinformationfortheitem.Thencontinuetoscan.
Weighing Procedure
25506
Top Plate
Scale Zero Button

Weighitemsusingthefollowingprocedure.
1.
Verifythedisplayreads0.000kg(0.00lb).